top of page

Products

Acoflex 300

Acrylic-based Waterproofing Membrane

“Super Elastic“

Acoflex 300 - 5kg (2).png
Acoflex 300 - 5kg (2).png

Product Description

Acoflex 300 is 1-component waterproofing membrane based on Acrylic emulsion resin with elongation at break of about 250%, seals cracks up to 2mm, used for waterproofing roof floors and walls. After application and curing, it will form a seamless, tough, flexible, super elastic and durable waterproofing layer under all weather conditions

Application

  • Wall, wall gaps between two houses, eave

  • Concrete roof, dome, tiled roof, metal roof

  • Toilet, bathroom, kitchen

  • Balcony, drainage ditch

Advantages

  • Eco-friendly

  • UV resistant, quick drying

  • High adhesion strength

  • Can be applied on moist surfaces

  • No tooth marks appear on the surface like Bitumen asphalt products

Technical Specification

Download Product Specification Sheet

Material Consumption

  • Depend on the thickness of the membrane: Primer layer (mixed with 20% water): about 0.2 kg/ m²/ layer

  • Coating layer: about 0.4 kg/ m²/ layer, apply at least 2 layers

Safety and Health Protection

  • Work in a well-ventilated area

  • Keep away from children

  • Wear gloves, mask and goggles when working

  • Avoid contact with skin and eyes: If splashed into eyes: Rinse eyes with clean water for at least 10 minutes and seek medical attention promptly; If splashed into skin: Wash immediately with soap and clean water

Using Instructions

Surface Preparation

  • Remove all impurities that will affect the adhesion of Acoflex 300 such as grease, surface curing agent and concrete debris, cement dust, mud, moss, etc.

  • The concrete surface must be clean, flat and hard to be able to construct a uniform thickness
    For uneven surfaces, they must be repaired before construction
    New concrete must wait 7 days before construction is allowed

Construction

Bonding primer:

Dilute Acoflex 300 with 20% clean water for primer application

Waterproofing layer:

Apply the first layer of Acoflex 300 waterproofing to the surface of the bonding primer. Wait for the first layer to dry completely, then apply the second or third layer using the same method - Application tools: Roller, brush or sprayer

Waterproofing for metal roof:

Clean rust with Ferri Clean, apply Acobond A530 bonding layer; then apply 2 layers of Acoflex 300. If the metal surface is rotten or has holes, reinforce it with a layer of fiberglass mesh on the surface before applying Acoflex 300

Note

  • Each waterproofing layer must be applied approximately 3-4 hours apart

  • Do not walk or step on the surface before it dries

  • Re-sweep damaged areas before finishing the surface

  • Protect the membrane surface after application, avoid rain and contact with water

  • Do not apply on surfaces with high temperatures due to strong sunlight, spray water to cool down, otherwise the membrane is very susceptible to blistering

Cleaning Tools

Clean tools immediately after use with clean water

Physical Parameter

For any information related to the product, please contact adchem's sales or the technical department

Contact Us

For sales and technical enquiry, please email to info@adchem.vn

bottom of page