top of page

Products

Acopox 626

Water-Based Epoxy Paint

Product Description

Acopox 626 is a 2-component water-based Epoxy paint compatible with moisture; specialized in coating concrete floors, walls and alkaline surfaces. The product is widely used in many fields

ACOPOX_626.png

Application

  • Light industries

  • Offices

  • Shops

  • Tea rooms, coffee shops

  • Laundry rooms

  • Laboratories

  • Hospitals

  • Agencies, institutes

  • Galleries, exhibitions

  • Parking lots

  • Water tanks, swimming pools

Advantages

  • Very light odor and safe for construction, Eco- friendly

  • Abrasion and impact resistant

  • Moderately glossy surface

  • Good adhesion on damp surfaces

  • Good adhesion between paint layers

  • Easy to clean and can be diluted with water

Safety and Health Protection

Technical Specification

Download Product Specification Sheet

  • Keep out of children

  • Do not eat, drink or smoke during construction

  • Wear rubber gloves, boots, glasses, masks and protective clothing when constructing

  • Avoid contact with skin and eyes: If contact with eyes: Rinse eyes under running water for at least 15 minutes. Go to the nearest medical facility immediately; If contact with skin: Change protective clothing, clean the skin contact area with water several times. Clean protective clothing again before use

Using Instructions

Surface Preparation

  • The surface must be clean, dry and hard; completely free of impurities such as grease, sand, concrete debris, and clean of previous surface coatings. A cleaning agent should be used for best results

  • Surface must be primed with Acopox 616 primer to fill the pores on the concrete surface before apply Acopox 626 paint

Mixing

  • Add all of component B to the container containing component A and mix for 3 minutes. Add about 5-10% clean water to adjust the viscosity to suit the application. Let the mixture rest and dissolve the foam, then stir gently again before applying

Construction

  • Wait for Acopox 616 primer to dry completely, apply Acopox 626 paint by a roller or paint sprayer over the primer. If applying to walls, paint from top to bottom

  • It is recommended to apply 2 layers of Acopox 626, the second layer should be applied after the first layer has dried completely; drying time also depends on humidity and surrounding environment

Cleaning Tools

  • Rinse with water immediately after application

  • Once hardened, can only be removed mechanically

Physical Parameter

For any information related to the product, please contact adchem's sales or the technical department

Contact Us

For sales and technical enquiry, please email to info@adchem.vn

bottom of page