top of page

Products

Acopox 636

Solvent-Free Epoxy Paint

Product Description

ACOPOX_636.png

Acopox 636 is a chemical-resistant, 2-component solvent-free Epoxy paint product, specializing in coating applications in industrial, commercial and laboratory fields. After applying Acopox 636, the finished surface has a high gloss and high abrasion resistance

Application Range

  • Food, bottled water and garment factories

  • Garage, car repair service and parking lot

  • Supermarkets, cold storage and wet places

  • Laboratories, agencies, academies

  • Showrooms, distribution centers

  • Water tanks made of concrete or steel

Advantages

  • Easy to construct

  • Safe to use

  • Light odor, Eco-friendly

  • No solvent, non-flammable

  • Good adhesion on wet and dry surfaces

  • Unaffected by moisture while dry

  • Outstanding chemical resistance

  • Can be constructed for domestic water tanks

Safety and Health Protection

  • Keep out of reach of children

  • During construction, do not eat, drink or smoke

  • Wear rubber gloves, boots, glasses, masks and labor protection clothing when working

  • Avoid contact with skin and eyes: If contact with eyes: Rinse eyes under continuously running water for at least 15 minutes. Go immediately to the nearest medical facility; If in contact with skin: Change into protective clothing and clean skin contact areas with water several times. Clean labor protective clothing before use

Technical Specification

Download Product Specification Sheet

Physical Parameter

Using Instructions

Surface Preparation

  • The surface must be clean, dry and hard; completely free of impurities such as grease, sand, concrete debris, and clean of previous surface coatings. A cleaning agent should be used for best results

  • Surface must be primed with Acopox 617 or Acopox 618 primer to fill the pores on the concrete surface before apply Acopox 636 paint

Mixing

Add all component B into the container containing component A and mix well for 3 minutes. Let the mixture rest to dissolve the foam, then gently stir again and apply

Construction

  • Wait for Acopox 617 or Acopox 618 primer to dry completely, apply Acopox 636 paint by a roller or paint sprayer over the primer. If applying to walls, paint from top to bottom

  • It is recommended to apply 2 layers of Acopox 636, the second layer should be applied after the first layer has dried completely; drying time also depends on humidity and surrounding environment

Cleaning Tools

  • Rinse with water immediately after application

  • Once hardened, can only be removed mechanically

Chemical Resistance Parameters

+ : resistance  A : affect  D : destroy

For any information related to the product, please contact adchem's sales or the technical department

Contact Us

For sales and technical enquiry, please email to info@adchem.vn

bottom of page