top of page

Products

Acoseal

Silane-based water-slip waterproofing product

Product Description

Acoseal is a Silane-based water-slip waterproofing product, with deep penetrating properties, colorless, completely transparent and invisible, does not form a film when dry, allowing the material surface to breathe. It specializes in applications for exposed stone and concrete, mortar, mineral-based products, block bricks, terracotta bricks and wood by brush, sprayer or roller

Acoseal.png
Acoseal.png

Application

  • Waterproofing for natural and artificial stone

  • Waterproofing for exposed concrete structures

  • Stone facades of high-rise buildings, tiled roofs

  • Walls apply bricks and decorative stones

  • Waterproofing for wharf structures

  • Exposed concrete structures, memorial statues

Specification

Advantages

Download Product Specification Sheet

  • Waterproof, resistant to mold and salt crystallization

  • Does not form a film when dry, allowing the material surface to breathe.Oil-based, deep penetration

  • Invisible, does not change the color of the material

  • Suitable for low-absorption materials

  • Longer waterproofing time than water-based products

  • Deeper penetration than water-based products

  • Stronger water-slip ability than water-based products

  • Can continue construction after drying

Material Consumption

  • Granite surface: 0.1 liter / m²/ layer

  • Mortar or concrete surface: 0.2 liter / m²/ layer
    ( depend on water absorption )

Mechanical Parameters

Safety and Health Protection

  • Keep out of children’s reach

  • Keep away from flammable objects and trees

  • Wear gloves, goggles and protective gear when working

  • Work in a well-ventilated area

  • Avoid breathing Hydroseal spray dust during application Avoid contact with skin and eyes: If on skin: wash immediately with clean water; If in eyes: wash immediately with clean water, apply eye drops and seek medical advice

Using Instructions

Surface Preparation

Clean the surface thoroughly. If using detergent, clean again with clean water several times and let dry completely to evaporate the chemical before applying.

Construction

  • Do not add any solution during application

  • Application tools: brush, sprayer or roller. Usually use a garden sprayer (hand pump) or use a low- pressure backpack pesticide sprayer for large and high surfaces

Notes

  • If using a sprayer, adjust the pressure appropriately

  • Keep away from green areas and areas that are flammable

  • Wipe off any traces of the sprayer during application as it is difficult to clean after drying

For any information related to the product, please contact adchem's sales or the technical department

Contact Us

For sales and technical enquiry, please email to info@adchem.vn

bottom of page