Products
Acothane 928
Polyurethane Coating Paint
Product Description
Acothane 928 is a 2-component, solvent-based Polyurethane paint product, specialized in construction applications for exposed outdoor projects that require UV resistance and durability in all weather conditions
Application
-
Extremely good chemical resistance
-
Impact and abrasion resistant, durable when scrubbed
-
Glossy surface after finishing
-
Long-lasting color and paint membrane
-
Interacts well with some primers or does not require primer for some materials
Advantages
-
Construction and protection of water tanks made of concrete or steel (inside or outside)
-
Pipes; Steel structure
-
Bridges and seaports are subject to salt water environments
-
Concrete walls and floors; High-rise building facade
-
Ramp and wood
Safety and Health Protection
-
Keep out of reach of children
-
Some ingredients of this product may be hazardous during mixing and application
-
Wear rubber gloves, boots, glasses, masks and labor protection clothing when working
-
Avoid contact with skin and eyes: If contact with eyes: Rinse eyes under continuously running water for at least 15 minutes. Go immediately to the nearest medical facility; If in contact with skin: Change into protective clothing and clean skin contact areas with water several times. Clean labor protective clothing before use
Technical Specification
Download Product Specification Sheet
Using Instructions
Surface Preparation
-
Concrete surface: must be cleaned to remove impurities, concrete debris and dust; Patch and repair flat and hard surfaces. New concrete must be well waterproofed and installed after 28 days. Primer before applying Acothane 928
-
Iron and steel surfaces: clean rusty iron and steel surfaces with Ferriclean product, clean the surface before applying Acothane 928
Mixing
Add all pre-measured component B into component A, mix well for 3 minutes until homogeneous, then let rest to dissolve foam and stir gently again when applying. A maximum of 10% of the total weight of A + B can be added with solvent.
Construction
-
Surface must be primed with Acopox 617 or Acopox 618 primer before apply Acothane 928 paint.
-
Wait for the primer layer to dry completely, then apply Acothane 928 by a roller or sprayer onto the primer layer. Apply at least 2 layers; Drying time also depends on humidity and surrounding environment
Note: Should mix the appropriate quantity to use and use it all within 30 minutes
Cleaning Tools
-
Clean tools immediately after use with solvent
-
Once the paint has hardened, it can only be cleaned by mechanical methods
Physical Parameter
For any information related to the product, please contact adchem's sales or the technical department
Contact Us
For sales and technical enquiry, please email to info@adchem.vn