top of page

Products

Acotile 21

Cement-based Tile Adhesive

Product Description

Acotile 21 - 25kg (1).png
Acotile 21 - 25kg (1).png

Acotile 21 is a one component cement-based tile adhesive for use indoor and outdoor. When using, just mix Acotile 21 with clean water according to the appropriate mixing ratio

Application

  • Acotile 21 is used indoor and outdoor to paste tiles (all sizes) and stones (light and medium weight) such as: Ceramic tiles, glazed tiles, natural and artificial decorative stones onto concrete surfaces, mortar and block bricks

Advantages

  • Easy to mix and apply, flexible mortar allows easier construction

  • Retains moisture for a long time and reduces shrinkage and Select the size of the trowel teeth according to the size of the tile follow this instruction: cracking

  • Tiles can be adjusted after pasting

  • High adhesion strength

  • No need to moisten the tile surface before pasting

  • Suitable for tropical and temperate climates

Technical Specification

Download Product Specification Sheet

Physical Parameter

Safety and Health Protection

  • Keep away from children

  • Acotile 21 contains alkali, so wear gloves, masks and protective equipment when mixing and applying

  • Avoid contact with skin and eyes: If contact with eyes: Rinse eyes under running water for at least 15 minutes. Go to the nearest medical facility immediately; If contact with skin: Change protective clothing, clean the skin contact area with water several times. Clean protective clothings before use

(According to the test method TCVN 7899 – 2:2008)

Material Consumption

Select the size of the trowel teeth according to the size of the tile follow this instruction:

The above rates are provided as a reference only, actual usage rate depend on the flatness of the surface

Using Instructions

Surface Preparation

  • Clean the surface of grease, concrete curing agents, cement slurry, concrete debris and other impurities

  • Apply Acotile 21 on a clean, hard and flat surface. For porous and friable surfaces, apply 1 or 2 layers of Acobond A530 primer to harden the surface before apply Acotile 21

  • If the old surface needs to be re-tiled, the old mortar must be cleaned first to avoid affecting the adhesion effect

Mixing

  • Mix thoroughly Acotile 21 with about 23 - 26% clean water (depending on the construction environment temperature)

  • Depend on the size of the tile to choose the notch of the trowel. Plaster the mixed mortar on the surface, create ribs on the mortar surface with a U-shaped or Square notched trowel

  • Paste the tile in the correct position, press and hammer firmly with a rubber hammer, wait until the mortar is dry and hard, then continue to apply the tile grout Acotile TG1

Note

  • In case the construction area is too large, it should be divided into separate areas to avoid the mortar drying before paste the tiles due to the influence of weather and temperature

  • Do not apply on a surface that is too wet

  • The maximum time allowed for applying mixed mortar is 30 minutes

  • The allowable temperature for construction is from 50C to 35°C

Cleaning Tools

Clean tools and equipment with clean water after use

For any information related to the product, please contact adchem's sales or the technical department

Contact Us

For sales and technical enquiry, please email to info@adchem.vn

bottom of page