top of page

Products

Acotile TG1

Cement-based Tile Grout

Product Description

Acotile TG1 - 10kg (1).png
Acotile TG1 - 10kg (1).png

Acotile TG1 is a ready-mixed one-component tile grout cement-based used to fill tile joints on walls and floors with a width of 1 - 5mm. When using, just mix with clean water according to the quantity

Application

  • Acotile TG1 is used to seal indoor and outdoor tile joints for all types of tiles such as: natural stone, decorative stone, granite, marble

Advantages

  • Easy to mix and apply

  • Reduces shrinkage and cracking after construction

  • High adhesion strength, compressive strength and flexural strength

  • Efficient and economical

  • Suitable for tropical and temperate climates

Technical Specification

Download Product Specification Sheet

Safety and Health Protection

  • Keep out of reach of children

  • Wear gloves, masks and protective equipment when mixing and applying

  • Mix in a well-ventilated area, avoid breathing dust when mixing

  • Avoid contact with skin and eyes: If contact with eyes: Rinse eyes under running water for at least 15 minutes. Go to the nearest medical facility immediately; If contact with skin: Change protective clothing, clean the skin contact area with water several times. Clean protective clothing again before use

Mechanical Parameters

Standard ISO 13007-4 (TCVN 7899-4)

Material Consumption

Coverage ratio (mix Acotile TG1 with 30% water)

The above norms (for reference only) do not include any physical part

Using Instructions

Surface Preparation

  • Tiles must be completely hard before applying grout

  • Clean excess tile grout between joints before grouting

Mixing

  • Mixing ratio: Acotile TG1 and water
    For wall tile joint: Acotile TG1 with 26–28% clean water
    For floor tile joint: Acotile TG1 with 28–30% clean water

  • Mix Acotile TG1 thoroughly with clean water until homogeneous.
    Let the mixture rest for a few minutes before applying

Construction

  • Apply grout to the tile gap with a plastic knife or a special tool, pressing deep inside to fill the gap

  • Clean the tile surface after construction

  • To avoid scratching the gap, when cleaning, use a damp sponge to wipe gently

Cleaning Tools

Clean tools and equipment with clean water after use

For any information related to the product, please contact adchem's sales or the technical department

Contact Us

For sales and technical enquiry, please email to info@adchem.vn

bottom of page