top of page

Products

Acotile 28

Tile Adhesive based on Cement and Polymer

Product Description

Acotile 28 is a 2-component tile adhesive product based on Cement and Polymer. After mixing, it will form a thick and homogeneous mixture used for tile bonding and grouting

ACOTILE_28.png

Application

  • Acotile 28 is used for bonding tiles and stones for swimming pools, bathrooms, Jacuzzis, water tanks and wet areas

Advantages

  • Easy to mix and convenient for construction

  • Improved mortar flexibility allows easier construction

  • Resistance to sagging

  • High adhesion strength

  • Good waterproofing

Safety and Health Protection

  • Keep out of reach of children

  • Wear gloves, masks and protective equipment when mixing and applying

  • Mix in a well-ventilated area, avoid breathing dust when mixing

  • Avoid contact with skin and eyes: If contact with eyes: Rinse eyes under running water for at least 15 minutes. Go to the nearest medical facility immediately; If contact with skin: Change protective clothing, clean the skin contact area with water several times. Clean protective clothing again before use

Technical Specification

Download Product Specification Sheet

Mechanical Parameters

(According to the test method TCVN 7899 – 2:2008)

Material Consumption

Select the size of the trowel teeth according to the size of the tile follow this instruction:

Using Instructions

Surface Preparation

  • The surface must be clean, dry, flat and hard

  • Remove all foreign matter adhering to the surface

  • The surface must be able to bear the weight of the materials used for construction

Concrete surface:

  • New concrete surface can only be applied after 28 days. Remove dirt, stains such as grease with water-based detergent and wire brush. Clean and dry the surface before applying

  • Old concrete surface must be free of dust, impurities and cement debris.
    If necessary, clean with water and let dry before applying

Mortar surface: 

  • New mortar surface must be allowed to dry for at least 3 weeks before applying.
    Remove all impurities adhering to the surface with a brush and clean with water-based detergent

  • Defects and voids on the surface must be removed or repaired with repair mortar

Mixing

  • Put the liquid component into a clean container and slowly add the powder component, using an electric mixer with a suitable blade to mix. Mix well until the mixture is homogeneous and lump-free

  • If the construction site weather is hot or windy, the powder ingredients can be reduced to facilitate construction

Construction

  • Use a flat-bladed steel trowel to apply the Acotile 28 mixture to the construction surface, then use a specialized tile adhesive trowel with a notch suitable for the tile size to flatten or create ribs. Stick and press the tile firmly into the correct position, use the trowel handle or a rubber hammer to tap lightly to fix the tile

  • Acotile 28 can also be applied on the back of the tile. Both methods are suitable for large or small tiles

Cleaning Tools

Clean tools and equipment with clean water after use

For any information related to the product, please contact adchem's sales or the technical department

Liên Hệ Chúng Tôi

Để biết thêm thông tin sản phẩm hoặc mua hàng, vui lòng gửi mail vào địa chỉ: info@adchem.vn

bottom of page